Subject Re: Updating buffer info to database file From Akshat Kapoor <akshat.kapoor@kapoorsons.in> Date Fri, 10 Aug 2018 19:10:00 +0530 Newsgroups dbase.getting-started >> >> I had suffered this issue earlier and finally located the fault to BDE >> settings. >> >> Open the BDE administrator. Under the configuration tab under system >> under init you will find a setting named local share. >> >> Set this to true. Your BDE settings should be similar to the one in the >> attached screen shot. Local Share is the most important for you to >> check. Rest you may or may not alter as per your requirements. >> >> Regards >> Akshat >> > If one looks at the desktop property settings, there is a multi-user block with Lock/Exclusive/Refresh and reprocess. > I am fiddling with the options when compiling, and will have a look at the results. > Thanks Akshat, will aslo have a look at the BDE settings, and will let you > know. I am 99% there, frustrating 1%. > John > Good evening John, Check the BDE administrator settings first. They have caused me a lot of heartburn for 2 complete months. And your case seems to be similar even to the extent of just 2 terminals being used. And If required change the setting on both terminals. Regards Akshat